 Fluid Mechanics for Chemical Engineers with Microfluidics and CFD, 2/E
 ISBN10: 0131482122 • ISBN13: 9780131482128
 ©2006 • Prentice Hall • Cloth, 784 pp

Published 09/29/2005 • Instock
Offers a comprehensive understanding of fluid mechanics essential for the chemical engineer and upper level students.
° A revision of the best selling fluid mechanics book for chemical engineers.
° Covers all the material necessary to pass the fluid mechanics portion of the Professional Engineer's exam.
° Includes software to facilitate an understanding of the important but difficult subject of turbulence.
Preface.
I. MACROSCOPIC FLUID MECHANICS.
1. Introduction to Fluid Mechanics.
1.1 Fluid Mechanics in Chemical Engineering
1.2 General Concepts of a Fluid
1.3 Stresses, Pressure, Velocity, and the Basic Laws
1.4 Physical Properties  Density, Viscosity, and Surface Tension
1.5 Units and Systems of Units
Example 1.1  Units Conversion
Example 1.2  Mass of Air in a Room
1.6 Hydrostatics
Example 1.3  Pressure in an Oil Storage Tank
Example 1.4  Multiple Fluid Hydrostatics
Example 1.5  Pressure Variations in a Gas
Example 1.6  Hydrostatic Force on a Curved Surface
Example 1.7  Application of Archimedes?f Law
1.7 Pressure Change Caused by Rotation
Example 1.8  Overflow from a Spinning Container
Problems for Chapter 1
2. Mass, Energy, and Momentum Balances.
2.1 General Conservation Laws
2.2 Mass Balances
Example 2.1  Mass Balance for Tank Evacuation
2.3 Energy Balances
Example 2.2  Pumping nPentane
2.4 Bernoulli’s Equation
2.5 Applications of Bernoulli?fs Equation
Example 2.3  Tank Filling
2.6 Momentum Balances
Example 2.4  Impinging Jet of Water
Example 2.5  Velocity of Wave on Water
Example 2.6  Flow Measurement by a Rotameter
2.7 Pressure, Velocity, and Flow Rate Measurement
Problems for Chapter
3. Fluid Friction in Pipes.
3.1 Introduction
3.2 Laminar Flow
Example 3.1  Polymer Flow in a Pipeline
3.3 Models for Shear Stress
3.4 Piping and Pumping Problems
Example 3.2  Unloading Oil from a Tanker
Specified Flow Rate and Diameter
Example 3.3  Unloading Oil from a Tanker
Specified Diameter and Pressure Drop
Example 3.4  Unloading Oil from a Tanker
Specified Flow Rate and Pressure Drop
Example 3.5  Unloading Oil from a Tanker
Miscellaneous Additional Calculations
3.5 Flow in Noncircular Ducts
Example 3.6  Flow in an Irrigation Ditch
3.6 Compressible Gas Flow in Pipelines
3.7 Compressible Flow in Nozzles
3.8 Complex Piping Systems
Example 3.7  Solution of a Piping/Pumping Problem
Problems for Chapter 3
4. Flow in Chemical Engineering Equipment.
4.1 Introduction
4.2 Pumps and Compressors
Example 4.1  Pumps in Series and Parallel
4.3 Drag Force on Solid Particles in Fluids
Example 4.2  Manufacture of Lead Shot
4.4 Flow Through Packed Beds
Example 4.3  Pressure Drop in a PackedBed Reactor
4.5 Filtration
4.6 Fluidization
4.7 Dynamics of a BubbleCap Distillation Column
4.8 Cyclone Separators
4.9 Sedimentation
4.10 Dimensional Analysis
Example 4.4  Thickness of the Laminar Sublayer
Problems for Chapter 4
II. MICROSCOPIC FLUID MECHANICS.
5. Differential Equations of Fluid Mechanics.
5.1 Introduction to Vector Analysis
5.2 Vector Operations
Example 5.1  The Gradient of a Scalar
Example 5.2  The Divergence of a Vector
Example 5.3  An Alternative to the Differential Element
Example 5.4  The Curl of a Vector
Example 5.5  The Laplacian of a Scalar
5.3 Other Coordinate Systems
5.4 The Convective Derivative
5.5 Differential Mass Balance
Example 5.6  Physical Interpretation of the Net Rate of Mass Outflow
Example 5.7  Alternative Derivation of the Continuity Equation
5.6 Differential Momentum Balances
5.7 Newtonian Stress Components in Cartesian Coordinates
Example 5.8  ConstantViscosity Momentum Balances in Terms of Velocity Gradients
Example 5.9  Vector Form of VariableViscosity Momentum Balance
Problems for Chapter 5
6. Solution of ViscousFlow Problems.
6.1 Introduction
6.2 Solution of the Equations of Motion in Rectangular Coordinates
Example 6.1  Flow Between Parallel Plates
6.3 Alternative Solution Using a Shell Balance
Example 6.2  Shell Balance for Flow Between Parallel Plates
Example 6.3  Film Flow on a Moving Substrate
Example 6.4  Transient Viscous Diffusion of Momentum (FEMLAB)
6.4 Poiseuille and Couette Flows in Polymer Processing
Example 6.5  The SingleScrew Extruder
Example 6.6  Flow Patterns in a Screw Extruder (FEMLAB)
6.5 Solution of the Equations of Motion in Cylindrical x Table of Contents Coordinates
Example 6.7  Flow Through an Annular Die
Example 6.8  Spinning a Polymeric Fiber
6.6 Solution of the Equations of Motion in Spherical Coordinates
Example 6.9  Analysis of a ConeandPlate Rheometer
Problems for Chapter 6
7. Laplace’s Equation, Irrotational and PorousMedia Flows.
7.1 Introduction
7.2 Rotational and Irrotational Flows
Example 7.1  Forced and Free Vortices
7.3 Steady TwoDimensional Irrotational Flow
7.4 Physical Interpretation of the Stream Function
7.5 Examples of Planar Irrotational Flow
Example 7.2  Stagnation Flow
Example 7.3  Combination of a Uniform Stream and a Line Sink (C)
Example 7.4  Flow Patterns in a Lake (FEMLAB)
7.6 Axially Symmetric Irrotational Flow
7.7 Uniform Streams and Point Sources
7.8 Doublets and Flow Past a Sphere
7.9 SinglePhase Flow in a Porous Medium
Example 7.5  Underground Flow of Water
7.10 TwoPhase Flow in Porous Media
7.11 Wave Motion in Deep Water
Problems for Chapter 7
8. BoundaryLayer Aand Other Nearly Unidirectional Flows.
8.1 Introduction
8.2 Simplified Treatment of Laminar Flow Past a Flat Plate
Example 8.1  Flow in an Air Intake
8.3 Simplification of the Equations of Motion
8.4 Blasius Solution for BoundaryLayer Flow
8.5 Turbulent Boundary Layers
Example 8.2  Laminar and Turbulent Boundary Layers Compared
8.6 Dimensional Analysis of the BoundaryLayer Problem
8.7 BoundaryLayer Separation
Example 8.3  BoundaryLayer Flow Between Parallel Plates (FEMLAB Library)
Example 8.4  Entrance Region for Laminar Flow Between Flat Plates
8.8 The Lubrication Approximation
Example 8.5  Flow in a Lubricated Bearing (FEMLAB)
8.9 Polymer Processing by Calendering
Example 8.6  Pressure Distribution in a Calendered Sheet
8.10 Thin Films and Surface Tension
Problems for Chapter 8
9. Turbulent Flow.
9.1 Introduction
Example 9.1  Numerical Illustration of a Reynolds Stress Term
9.2 Physical Interpretation of the Reynolds Stresse
9.3 MixingLength Theory
9.4 Determination of Eddy Kinematic Viscosity and Mixing Length
9.5 Velocity Profiles Based on Mixing Length Theory 486
Example 9.2  Investigation of the von K?Larm?Lan Hypothesis
9.6 The Universal Velocity Profile for Smooth Pipes
9.7 Friction Factor in Terms of Reynolds Number for Smooth Pipes
Example 9.3  Expression for the Mean Velocity
9.8 Thickness of the Laminar Sublayer
9.9 Velocity Profiles and Friction Factor for Rough Pipe
9.10 BlasiusType Law and the PowerLaw Velocity Profile
9.11 A Correlation for the Reynolds Stresses
9.12 Computation of Turbulence by the k/? Method
Example 9.4  Flow Through an Orifice Plate (FEMLAB)
Example 9.5  Turbulent Jet Flow (FEMLAB)
9.13 Analogies Between Momentum and Heat Transfer
Example 9.6  Evaluation of the Momentum/HeatTransfer Analogies
9.14 Turbulent Jets
Problems for Chapter 9
10. Bubble Motion, TwoPhase Flow, and Fluidization.
10.1 Introduction
10.2 Rise of Bubbles in Unconfined Liquids
Example 10.1  Rise Velocity of Single Bubbles
10.3 Pressure Drop and Void Fraction in Horizontal Pipes
Example 10.2  TwoPhase Flow in a Horizontal Pipe
10.4 TwoPhase Flow in Vertical Pipes
Example 10.3  Limits of Bubble Flow
Example 10.4  Performance of a GasLift Pump
Example 10.5  TwoPhase Flow in a Vertical Pipe
10.5 Flooding
10.6 Introduction to Fluidization
10.7 Bubble Mechanics
10.8 Bubbles in Aggregatively Fluidized Beds
Example 10.6  Fluidized Bed with Reaction (C)
Problems for Chapter 10
11. NonNewtonian Fluids.
11.1 Introduction
11.2 Classification of NonNewtonian Fluids
11.3 Constitutive Equations for Inelastic Viscous Fluids
Example 11.1  Pipe Flow of a PowerLaw Fluid
Example 11.2  Pipe Flow of a Bingham Plastic
Example 11.3  NonNewtonian Flow in a Die (FEMLAB Library)
11.4 Constitutive Equations for Viscoelastic Fluids
11.5 Response to Oscillatory Shear
11.6 Characterization of the Rheological Properties of Fluids
Example 11.4  Proof of the Rabinowitsch Equation
Example 11.5  Working Equation for a Coaxial Cylinder Rheometer: Newtonian Fluid
Problems for Chapter 11
12. Microfluidics and Electrokinetic Flow Effects.
12.1 Introduction
12.2 Physics of Microscale Fluid Mechanics
12.3 Pressuredriven Flow Through Microscale Tubes
Example 12.1  Calculation of Reynolds Numbers
12.4 Mixing, Transport, and Dispersion
12.5 Species, Energy, and Charge Transport
12.6 The Electrical Double Layer and Electrokinetic Phenomena
Example 12.2  Relative Magnitudes of Electroosmotic and Pressuredriven Flow
Example 12.3  Electroosmotic Flow Around a Particle
Example 12.4  Electroosmosis in a Microchannel (FEMLAB)
Example 12.5  Electroosmotic Switching in a Branched Microchannel (FEMLAB)
12.7 Measuring the Zeta Potential
Example 12.6  Magnitude of Typical Streaming Potentials
12.8 Electroviscosity
12.9 Particle and Macromolecule Motion in Microfluidic Channels
Example 12.7  Gravitational and Magnetic Settling of Assay Beads
Problems for Chapter 12
13. An Introduction to Computational Fluid Dynamics and Flowlab.
13.1 Introduction and Motivation
13.2 Numerical Methods
13.3 Learning CFD by Using FlowLab
13.4 Practical CFD Examples
Example 13.1  Developing Flow in a Pipe Entrance Region (FlowLab)
Example 13.2  Pipe Flow Through a Sudden Expansion (FlowLab)
Example 13.3  A TwoDimensional Mixing Junction (FlowLab)
Example 13.4  Flow Over a Cylinder (FlowLab)
References for Chapter 13
14. Femlab for Solving Fluid Mechanics Problems.
14.1 Introduction to FEMLAB
14.2 How to Run FEMLAB
Example 14.1  Flow in a Porous Medium with an Obstruction (FEMLAB)
14.3 Draw Mode
14.4 Solution and Related Modes
14.5 Fluid Mechanics Problems Solvable by FEMLAB
Problems for Chapter 14
Appendix A: Useful Mathematical Relationships.
Appendix B: Answers to the True/False Assertions.
Appendix C: Some Vector and Tensor Operations.
Index.
The Chemical Engineer's Practical Guide to Contemporary Fluid Mechanics
Since most chemical processing applications are conducted either partially or totally in the fluid phase, chemical engineers need a strong understanding of fluid mechanics. Such knowledge is especially valuable for solving problems in the biochemical, chemical, energy, fermentation, materials, mining, petroleum, pharmaceuticals, polymer, and wasteprocessing industries.
Fluid Mechanics for Chemical Engineers, Second Edition, with Microfluidics and CFD, systematically introduces fluid mechanics from the perspective of the chemical engineer who must understand actual physical behavior and solve realworld problems. Building on a first edition that earned Choice Magazine's Outstanding Academic Title award, this edition has been thoroughly updated to reflect the field's latest advances.
This second edition contains extensive new coverage of both microfluidics and computational fluid dynamics, systematically demonstrating CFD through detailed examples using FlowLab and COMSOL Multiphysics. The chapter on turbulence has been extensively revised to address more complex and realistic challenges, including turbulent mixing and recirculating flows.
Part I offers a clear, succinct, easytofollow introduction to macroscopic fluid mechanics, including physical properties; hydrostatics; basic rate laws for mass, energy, and momentum; and the fundamental principles of flow through pumps, pipes, and other equipment. Part II turns to microscopic fluid mechanics, which covers
Fluid Mechanics for Chemical Engineers, Second Edition, with Microfluidics and CFD, includes 83 completely worked practical examples, several of which involve FlowLab and COMSOL Multiphysics. There are also 330 endofchapter problems of varying complexity, including several from the University of Cambridge chemical engineering examinations. The author covers all the material needed for the fluid mechanics portion of the Professional Engineer's examination.
The author's Web site, www.engin.umich.edu/~fmche/, provides additional notes on individual chapters, problemsolving tips, errata, and more.
Give your students choices! PearsonChoices products are designed to give your students more value and flexibility by letting them choose from a variety of text and media formats to best match their learning style and their budget.
Pearson offers special pricing when you choose to package your text with other student resources. If you're interested in creating a costsaving package for your students, see the Packages tab.
This product is a member of the following series. Click on the series name to see the full list of products in the series.
Pearson Higher Education offers special pricing when you choose to package your text with other student resources. If you're interested in creating a costsaving package for your students contact your Pearson Higher Education representative.
Nobody is smarter than you when it comes to reaching your students. You know how to convey knowledge in a way that is relevant and relatable to your class. It's the reason you always get the best out of them. And when it comes to planning your curriculum, you know which course materials express the information in the way that’s most consistent with your teaching. That’s why we give you the option to personalize your course material using just the Pearson content you select. Take only the most applicable parts of your favorite materials and combine them in any order you want. You can even integrate your own writing if you wish. It's fast, it's easy and fewer course materials help minimize costs for your students.
For more information: www.pearsonlearningsolutions.com/highereducation
Explore our course catalogs and see how you can customize your own textbooks.
Our library is vast, and it's all at your fingertips. Create a custom book by selecting content from any of our coursespecific collections. Here, you'll find chapters from Pearson titles, carefullyselected thirdparty content with copyright clearance, and pedagogy. Once you're satisfied with your customized book, you will have a printondemand book that can be purchased by students in the same way they purchase other course material.
Browse through our list of published titles. These books are examples of original manuscripts created in partnership with local Custom Field Editors. They have been authored by instructors at specific campuses, but are readily available for adoption.
Pearson Learning Solutions will partner with you to select or create eBooks, custom eBooks, online learning courses, resource materials, teaching content, media resources and media supplements. Simply share your course goals with our worldclass experts, and they will offer you a selection of outstanding, uptotheminute solutions.
For more information: http://www.pearsonlearningsolutions.com/highereducation/explorecustomdigitalsolutions.php
Pearson Learning Solutions offers a broad range of courses and custom solutions for webenhanced, blended and online learning. Our course content is developed by a team of respected subject matter experts and experienced eLearning instructional designers. All course content is designed around specific learning objectives.
For more information: www.pearsonlearningsolutions.com/highereducation/customizableonlinecourseware